The fastening system Valex 1000 for indirect fixing has been studied specifically for crane rails but it can be used with good results also with train and light rails. It is a very rugged, reliable fastening system of contained dimensions. It can be used with any type of crane independently of the driving system.
The main features are: elastic fastening of rails with or without pad; system made up of two interacting elements that allow an easy lateral adjustment of the rail; the two parts of the clip are locked together tightening a bolt; the elastomer nose increases the tolerances rail-support structure, reduces the stress of the
connections, allows a better fixing of the rail.
Place the base in contact with the rail at the distance indicated in the technical cards. Weld the two perpendicular sides of the base and the external side opposite to the rail with either electrode or rod. Insert the screw in the base. Place the upper part of the system, the washer and the nut. Proceed to a light tightening. Control the line up of the rails. Complete the tightening. Electrode:
AVS: A5.1E70J8 1H4 EN: 499 E42 5B32H5
Rod: AVS: A5.18 ER70 S-6 EN: 440 G42 2HG3 SI1
For technical specifications, please see technical cards.